Tanks, Generators and Immersible Transducers
A generator, transducer, and tank make up an ultrasonic cleaning system, and Crest's systems are designed to provide the most effective precision cleaning results.
Genesis™ Generators
Outstanding and consistent performance, process control and the ability to monitor output for consistent cleaning time after time.
TRU-SWEEP™ sweep frequency eliminates inconsistent cleaning by sweeping a +/- 1kHz around the center frequency at a set repetitive rate.
Standard two power options to vary cleaning from gentle for delicate parts to periodic short blasts of power for hard to clean parts.
3 controls including Amplitude control to vary ultrasonic power, Duty Cycle Control to control the amount of ultrasonic energy delivered and Frequency control to adjust the frequency of the ultrasonic energy reducing audible noise from subharmonics.
Available in 25, 40 or 68 kHz frequencies and in either 250 or 500 watt models.
Transducerized Tanks
Transecerized Tranks provide the optimum environment for precision cleaning with extended service life.
Constructed of cavitation resistant, bright annealed 316L stainless steel.
Welded inside and out for long-term stability and sturdy performance.
Cove corner construction with ground and polished welds available.
Sloped bottoms for easy draining.
Vibra-Bar™ Transducers
These specially bonded, durable transducers offer enhanced cleaning performance. The Vibra-Bar design consists of two transducer stacks which permit simultaneous multiple frequencies. They are available in the form of transducerized tanks and separate immersibles which are fully sealed so they can be inserted into an existing tank to convert it into an ultrasonic cleaning system.
Technical Information
Genesis™ Ultrasonic Generators
| Power Output (watts) |
|
Model
|
Full
Wave |
Half
Wave |
Full & Half
Wave |
Max. Power Input
120V/50-60 Hz |
Dimensions
L x W x H |
# of Plug-in
Modules |
|
G-250-3
|
250
|
125
|
500
|
3A/360W
|
5.25"x14"x12"
|
1
|
|
G-500-6
|
500
|
250
|
1000
|
5A/600W
|
5.25"x14"x12"
|
1
|
|
G-750-9
|
750
|
375
|
1500
|
8A/960W
|
10.5"x14"x12"
|
2
|
|
G-1000-12
|
1000
|
500
|
2000
|
10A/1200W
|
10.5"x14"x12"
|
2
|
|
G-1500-18
|
1500
|
750
|
3000
|
15A/1800W
|
15.75"x14"x12"
|
3
|
|
G-2000-24
|
2000
|
1000
|
4000
|
20A/2400W
|
21"x14"x12"
|
4
|
|
NOTE: Prefix X in model number
should be substituted with a 2 (for 25 kHz) or 4 (for 40 kHz) when ordering. Last
digits in model number indicate the number of Vibra-Bars on the unit. |
Transducerized Tanks
|
Model
|
Capacity
(Gallons) |
Internal Dimensions
W x L x D |
Overall Dimensions
W x L x H |
Power Req.
(heated tank) |
Generator
Required |
|
HT-710-3
|
3
|
7"x10"x10"
|
10"x13"x14.5"
|
120V/4.2A/500W
|
250W
|
|
HT-1014-6
|
5
|
10"x14"x10"
|
13"x17"x14.5"
|
120V/8.4A/1000W
|
500W
|
|
HT-1218-9
|
10
|
12"x18"x12"
|
15"x21"x16.25"
|
240V/8.4A/2000W
|
750W
|
|
HT-1524-12
|
19
|
15"x24"x14"
|
18"x27"x18.75"
|
240V/12.6A/3000W
|
1000W
|
|
HT-1622-12
|
22
|
16"x22"x16"
|
19"x25"x20.75"
|
240V/12.6A/3000W
|
1000W
|
|
HT-1826-18
|
33
|
18"x26"x18"
|
21"x29"x22.75"
|
240V/16.8A/4000W
|
1500W
|
|
HT-2426-30
|
49
|
24"x26"x20"
|
27"x29"x24"
|
240V/21A/5000W
|
2500W
|
|
HT-2436-42
|
68
|
24"x36"x20"
|
27"x39"x24"
|
240V/34A/8000W
|
3500W
|
|
HT-2446-54
|
86
|
24"x46"x20"
|
27"x49"x24"
|
240V/42A/10,000W
|
4500W
|
|
HT-1236-24
|
34
|
12"x36"x20"
|
15"x39"x24"
|
240V/17A/4000W
|
2000W
|
|
HT-1246-30
|
43
|
12"x46"x20"
|
15"x49"x24"
|
240V/21A/5000W
|
2500W
|
|
NOTE: All tanks have 1"
wide flange around top edge. Flange not included in overall dimensions.
Prefix X in model number
should be substituted with a 2 (for 25 kHz) or 4 (for 40 kHz) when ordering.
OPTIONS: Stainless steel tank cover • stainless steel work basket • water jacket • condensing collar • overflow well • cove corner construction • ground and polished welds • drain valve - ball type (brass or stainless steel) • recirculating filter system (brass or stainless steel) • matching rinse tank - no transducers (heated or unheated) • ChemCrest chemicals • custom sizes • sealed skirts • different voltages • sound dampening. |
Immersible Transducers
|
Model*
|
Mounting Types
Available* |
Dimensions
W x L x H** |
Generator
Required |
|
CI-320-3
|
FC, EB, DBB
|
3.5"x20"x3"
|
250W
|
|
CI-710-3
|
FC, EB, BB
|
7"x10"x3"
|
250W
|
|
CI-720-6
|
FC, EB, DBB
|
7"x20"x3"
|
500W
|
|
CI-817-6
|
FC, EB, DBB
|
8"x17"x3"
|
500W
|
|
CI-1218-12
|
FC, DBB
|
12"x18"x3"
|
1000W
|
|
CI-732-12
|
FC, DBB
|
7"x32"x3"
|
1000W
|
|
* When ordering, add mounting type desired as model suffix (e.g. 4CI-710-3-EB)
NOTE: Prefix X in model number
should be substituted with a 2 (for 25 kHz) or 4 (for 40 kHz) when ordering.
|
Distributed By:
